П О Р Т А Л                            
С Е Т Е В Ы Х                          
П Р О Е К Т О В                        
  
Поиск по сайту:
                                                 
Главная

О проекте

Web-мастеру
     HTML & JavaScript
     SSI
     Perl
     PHP
     XML & XSLT
     Unix Shell

MySQL

Безопасность

Хостинг

Другое








Самое читаемое:

Учебник PHP - "Для Чайника".
Просмотров 3408 раз(а).

Иллюстрированный самоучитель по созданию сайтов.
Просмотров 5957 раз(а).

Учебник HTML.
Просмотров 3201 раз(а).

Руководство по PHP5.
Просмотров 5418 раз(а).

Хостинг через призму DNS.
Просмотров 4018 раз(а).

Подборка текстов стандартных документов.
Просмотров 55707 раз(а).

Учебник PHP - Самоучитель
Просмотров 2995 раз(а).

Документация на MySQL (учебник & справочное руководство)
Просмотров 4569 раз(а).

Внешние атаки...
Просмотров 3732 раз(а).

Учебник PHP.
Просмотров 2767 раз(а).

SSI в примерах.
Просмотров 37384 раз(а).



 
 
| Добавить в избранное | Сделать стартовой | Помощь





Руководство по PHP
Пред. Приложение K. List of Reserved Words След.

Predefined Variables

Since PHP 4.1.0, the preferred method for retrieving external variables is with the superglobals mentioned below. Before this time, people relied on either register_globals or the long predefined PHP arrays ($HTTP_*_VARS). Начиная с PHP 5.0.0, длинные предопределенные переменные массивов PHP могут быть отключены директивой register_long_arrays.

Server variables: $_SERVER

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_SERVER_VARS.

$_SERVER is an array containing information such as headers, paths, and script locations. The entries in this array are created by the webserver. There is no guarantee that every webserver will provide any of these; servers may omit some, or provide others not listed here. That said, a large number of these variables are accounted for in the CGI 1.1 specification, so you should be able to expect those.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_SERVER; to access it within functions or methods, as you do with $HTTP_SERVER_VARS.

$HTTP_SERVER_VARS contains the same initial information, but is not an autoglobal. (Note that $HTTP_SERVER_VARS and $_SERVER are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_SERVER and $HTTP_SERVER_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

You may or may not find any of the following elements in $_SERVER. Note that few, if any, of these will be available (or indeed have any meaning) if running PHP on the command line.

'PHP_SELF'

The filename of the currently executing script, relative to the document root. For instance, $_SERVER['PHP_SELF'] in a script at the address http://example.com/test.php/foo.bar would be /test.php/foo.bar. The __FILE__ constant contains the full path and filename of the current (i.e. included) file.

If PHP is running as a command-line processor this variable contains the script name since PHP 4.3.0. Previously it was not available.

'argv'

Array of arguments passed to the script. When the script is run on the command line, this gives C-style access to the command line parameters. When called via the GET method, this will contain the query string.

'argc'

Contains the number of command line parameters passed to the script (if run on the command line).

'GATEWAY_INTERFACE'

What revision of the CGI specification the server is using; i.e. 'CGI/1.1'.

'SERVER_NAME'

The name of the server host under which the current script is executing. If the script is running on a virtual host, this will be the value defined for that virtual host.

'SERVER_SOFTWARE'

Server identification string, given in the headers when responding to requests.

'SERVER_PROTOCOL'

Name and revision of the information protocol via which the page was requested; i.e. 'HTTP/1.0';

'REQUEST_METHOD'

Which request method was used to access the page; i.e. 'GET', 'HEAD', 'POST', 'PUT'.

Замечание: PHP script is terminated after sending headers (it means after producing any output without output buffering) if the request method was HEAD.

'REQUEST_TIME'

The timestamp of the start of the request. Available since PHP 5.1.0.

'QUERY_STRING'

The query string, if any, via which the page was accessed.

'DOCUMENT_ROOT'

The document root directory under which the current script is executing, as defined in the server's configuration file.

'HTTP_ACCEPT'

Contents of the Accept: header from the current request, if there is one.

'HTTP_ACCEPT_CHARSET'

Contents of the Accept-Charset: header from the current request, if there is one. Example: 'iso-8859-1,*,utf-8'.

'HTTP_ACCEPT_ENCODING'

Contents of the Accept-Encoding: header from the current request, if there is one. Example: 'gzip'.

'HTTP_ACCEPT_LANGUAGE'

Contents of the Accept-Language: header from the current request, if there is one. Example: 'en'.

'HTTP_CONNECTION'

Contents of the Connection: header from the current request, if there is one. Example: 'Keep-Alive'.

'HTTP_HOST'

Contents of the Host: header from the current request, if there is one.

'HTTP_REFERER'

The address of the page (if any) which referred the user agent to the current page. This is set by the user agent. Not all user agents will set this, and some provide the ability to modify HTTP_REFERER as a feature. In short, it cannot really be trusted.

'HTTP_USER_AGENT'

Contents of the User-Agent: header from the current request, if there is one. This is a string denoting the user agent being which is accessing the page. A typical example is: Mozilla/4.5 [en] (X11; U; Linux 2.2.9 i586). Among other things, you can use this value with get_browser() to tailor your page's output to the capabilities of the user agent.

'HTTPS'

Set to a non-empty value if the script was queried through the HTTPS protocol.

'REMOTE_ADDR'

The IP address from which the user is viewing the current page.

'REMOTE_HOST'

The Host name from which the user is viewing the current page. The reverse dns lookup is based off the REMOTE_ADDR of the user.

Замечание: Your web server must be configured to create this variable. For example in Apache you'll need HostnameLookups On inside httpd.conf for it to exist. See also gethostbyaddr().

'REMOTE_PORT'

The port being used on the user's machine to communicate with the web server.

'SCRIPT_FILENAME'

The absolute pathname of the currently executing script.

Замечание: If a script is executed with the CLI, as a relative path, such as file.php or ../file.php, $_SERVER['SCRIPT_FILENAME'] will contain the relative path specified by the user.

'SERVER_ADMIN'

The value given to the SERVER_ADMIN (for Apache) directive in the web server configuration file. If the script is running on a virtual host, this will be the value defined for that virtual host.

'SERVER_PORT'

The port on the server machine being used by the web server for communication. For default setups, this will be '80'; using SSL, for instance, will change this to whatever your defined secure HTTP port is.

'SERVER_SIGNATURE'

String containing the server version and virtual host name which are added to server-generated pages, if enabled.

'PATH_TRANSLATED'

Filesystem- (not document root-) based path to the current script, after the server has done any virtual-to-real mapping.

Замечание: As of PHP 4.3.2, PATH_TRANSLATED is no longer set implicitly under the Apache 2 SAPI in contrast to the situation in Apache 1, where it's set to the same value as the SCRIPT_FILENAME server variable when it's not populated by Apache. This change was made to comply with the CGI specification that PATH_TRANSLATED should only exist if PATH_INFO is defined.

Apache 2 users may use AcceptPathInfo = On inside httpd.conf to define PATH_INFO.

'SCRIPT_NAME'

Contains the current script's path. This is useful for pages which need to point to themselves. The __FILE__ constant contains the full path and filename of the current (i.e. included) file.

'REQUEST_URI'

The URI which was given in order to access this page; for instance, '/index.html'.

'PHP_AUTH_DIGEST'

When running under Apache as module doing Digest HTTP authentication this variable is set to the 'Authorization' header sent by the client (which you should then use to make the appropriate validation).

'PHP_AUTH_USER'

When running under Apache or IIS (ISAPI on PHP 5) as module doing HTTP authentication this variable is set to the username provided by the user.

'PHP_AUTH_PW'

When running under Apache or IIS (ISAPI on PHP 5) as module doing HTTP authentication this variable is set to the password provided by the user.

'AUTH_TYPE'

When running under Apache as module doing HTTP authenticated this variable is set to the authentication type.

Environment variables: $_ENV

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_ENV_VARS.

These variables are imported into PHP's global namespace from the environment under which the PHP parser is running. Many are provided by the shell under which PHP is running and different systems are likely running different kinds of shells, a definitive list is impossible. Please see your shell's documentation for a list of defined environment variables.

Other environment variables include the CGI variables, placed there regardless of whether PHP is running as a server module or CGI processor.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_ENV; to access it within functions or methods, as you do with $HTTP_ENV_VARS.

$HTTP_ENV_VARS contains the same initial information, but is not an autoglobal. (Note that $HTTP_ENV_VARS and $_ENV are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_ENV and $HTTP_ENV_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP Cookies: $_COOKIE

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_COOKIE_VARS.

An associative array of variables passed to the current script via HTTP cookies. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_COOKIE; to access it within functions or methods, as you do with $HTTP_COOKIE_VARS.

$HTTP_COOKIE_VARS contains the same initial information, but is not an autoglobal. (Note that $HTTP_COOKIE_VARS and $_COOKIE are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_COOKIE and $HTTP_COOKIE_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP GET variables: $_GET

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_GET_VARS.

An associative array of variables passed to the current script via the HTTP GET method. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_GET; to access it within functions or methods, as you do with $HTTP_GET_VARS.

$HTTP_GET_VARS contains the same initial information, but is not an autoglobal. (Note that $HTTP_GET_VARS and $_GET are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_GET and $HTTP_GET_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP POST variables: $_POST

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_POST_VARS.

An associative array of variables passed to the current script via the HTTP POST method. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_POST; to access it within functions or methods, as you do with $HTTP_POST_VARS.

$HTTP_POST_VARS contains the same initial information, but is not an autoglobal. (Note that $HTTP_POST_VARS and $_POST are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_POST and $HTTP_POST_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

HTTP File upload variables: $_FILES

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_POST_FILES.

An associative array of items uploaded to the current script via the HTTP POST method. Automatically global in any scope.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_FILES; to access it within functions or methods, as you do with $HTTP_POST_FILES.

$HTTP_POST_FILES contains the same information, but is not an autoglobal. (Note that $HTTP_POST_FILES and $_FILES are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_FILES and $HTTP_POST_FILES arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

Request variables: $_REQUEST

Замечание: Introduced in 4.1.0. There is no equivalent array in earlier versions.

Замечание: Prior to PHP 4.3.0, $_FILES information was also included in $_REQUEST.

An associative array consisting of the contents of $_GET, $_POST, and $_COOKIE.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_REQUEST; to access it within functions or methods.

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_REQUEST array. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

Session variables: $_SESSION

Замечание: Introduced in 4.1.0. In earlier versions, use $HTTP_SESSION_VARS.

An associative array containing session variables available to the current script. See the Session functions documentation for more information on how this is used.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $_SESSION; to access it within functions or methods, as you do with $HTTP_SESSION_VARS.

$HTTP_SESSION_VARS contains the same information, but is not an autoglobal. (Note that $HTTP_SESSION_VARS and $_SESSION are different variables and that PHP handles them as such)

If the register_globals directive is set, then these variables will also be made available in the global scope of the script; i.e., separate from the $_SESSION and $HTTP_SESSION_VARS arrays. For related information, see the security chapter titled Using Register Globals. These individual globals are not autoglobals.

Global variables: $GLOBALS

Замечание: $GLOBALS has been available since PHP 3.0.0.

An associative array containing references to all variables which are currently defined in the global scope of the script. The variable names are the keys of the array.

This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. You don't need to do a global $GLOBALS; to access it within functions or methods.

The previous error message: $php_errormsg

$php_errormsg is a variable containing the text of the last error message generated by PHP. This variable will only be available within the scope in which the error occurred, and only if the track_errors configuration option is turned on (it defaults to off).


Пред. Начало След.
List of Reserved Words Уровень выше Predefined Classes


Если Вы не нашли что искали, то рекомендую воспользоваться поиском по сайту:
 





Copyright © 2005-2016 Project.Net.Ru